Just starting out? Find answers to commonly asked homebrewing questions here!
- Posts: 8
- Joined: |27 Apr 2014|, 17:26
- Favourite Beer: red ale
I was messing with the pressure on one of my kegs yesterday and i decided to turn the pressure down on it, but when i did it seemed like the regulator was bleeding pressure off the co2 cylinder instead of the keg, so i stopped messing with it. Is there an easy fix for this? or should i get a new regulator. im pretty well positive that it was bleeding off the tank not the keg as i can hear the co2 tank releasing gas.
- Posts: 517
- Joined: |26 Sep 2015|, 01:01
- Favourite Beer: Stouts
- Location: Bonnyville, Ab
I know that with my regulator if i lower presssure on it, it does not lower the pressure in the keg, i have to release thjs pressure myself by pulling the safety pin. How to fix your problem, someone with more experience will need to wiegh in.
In the fermentor: Golden Sour, Not a Pill v2
Tap 1: Puck that Filsner; Berliner Weisse
Tap 2: Not a Pill; Lager
Tap 3: Paddockwood Kolsch
- Posts: 151
- Joined: |23 Feb 2012|, 15:58
- Favourite Beer: mine
It's ok. As you lowered the pressure, the excess gas vented out the design hole.