My 16 Year Old Valley Mill
My 16 Year Old Valley Mill
Bought this in 2003 from a guy in Ottawa who made them. It has been a great 2 roll mill until the last few brews. I am wondering if it is getting worn, or is sit just the 2 row Canada Malt I am using. Maybe the grain is smaller. My efficiency is down to 63% from 81%. I turned up the notch in my last brew and got 79%. Do the rollers in mills get worn enough so that you have to adjust them? Or is Canada Malt 2 row really getting smaller? I rarely payed attention to my crush until now.
- brhenrio
- Moderator
- Posts: 515
- Joined: |26 Sep 2015|, 01:01
- Favourite Beer: Stouts
- Location: Bonnyville, Ab
Re: My 16 Year Old Valley Mill
Quite normal for them to wear out, although itcould have just bern the fasteners backing off after all the usage. I usually check mine with a feeler gauge if I remember.
In the fermentor: Golden Sour, Not a Pill v2
Tap 1: Puck that Filsner; Berliner Weisse
Tap 2: Not a Pill; Lager
Tap 3: Paddockwood Kolsch
Tap 4:
Tap 1: Puck that Filsner; Berliner Weisse
Tap 2: Not a Pill; Lager
Tap 3: Paddockwood Kolsch
Tap 4:
Re: My 16 Year Old Valley Mill
This mill has notches, ( 1, 2, 3 4, etc. ) I don't think it can be adjusted. I go up for one type of malt and go down for another. A new malt is not in the budget.